Kati Mesh Back & Trucker Caps Wholesale

Kati Mesh Back Caps and Trucker Hats Wholesale: LC5M, LC101V, LC350M, AM350M and S700M

Air moves through a mesh back, and that single fact has kept the trucker silhouette on wholesale walls for decades. Farm crews, hunters, festival vendors and everyday resale buyers all reach for it in warm months, and decorators like it because the structured front panel holds art the moment the cap leaves the hoop. Within the Kati headwear line, five styles answer that demand, each taking the mesh back in a different direction: licensed camo, washed camo, woven flag, flag mesh and printed mesh.

What follows is a working comparison of those five, built for buyers assembling a warm weather wall or adding a trucker slot to an existing camo program. Several of these styles also appear among the Kati best sellers, which is a useful signal for anyone deciding where to start.

Five Takes on the Mesh Back, One Brand

The Kati LC5M Licensed Camo Mesh Back Cap is the hunting channel workhorse: 60/40 brushed cotton/polyester front panels, a 100% polyester mesh back, a structured six-panel mid-profile crown and a hook-and-loop closure. Its colorways lean into contrast, from Realtree AP/Neon Orange and Realtree AP/Neon Yellow for visibility to Breakup/Breakup and Prym1 Amped Green/Black for a quieter read. The LC5M camo mesh back caps page walks through every combination.

The Kati LC101V Licensed Camo Washed Mesh Cap is the outlier in the group and the reason many buyers find it. It is unstructured and low-profile with washed mesh-back panels, so it arrives looking broken in rather than boxy. Colorways run Realtree Max 5/Tan, Breakup/Black, Country/Tan and Xtra/Xtra, all with hook-and-loop closures. Details sit on the LC101V camo washed mesh caps page.

The Kati LC350M Camo Woven USA Flag Mesh Cap layers a woven USA flag panel design over the camo mesh formula, with 60/40 front panels, a polyester mesh back and a snapback, in Xtra/Xtra/USA Flag Mesh. Buyers who want that same woven flag on a full fabric crown step over to its family pair, the Kati LC350 Camo Woven USA Flag Cap. The mesh version has its own LC350M camo flag mesh caps page.

The Kati AM350M USA Flag Mesh Cap drops the camo entirely: 100% cotton twill front panels in Black, Navy or Red, a 100% polyester USA flag mesh back and a snapback closure. Its full fabric sibling is the Kati AM350S USA Flag Cap, and the mesh colorways are laid out on the AM350M USA flag mesh caps page.

Finally, the Kati S700M Printed Mesh Trucker Cap is the graphic engine of the group, with 19 printed design combinations across its polyester mesh backs: USA, Texas, Colorado, Canada and Mexico flags, plus clover, skull, fleur de lis and rainbow designs over 60/40 blend fronts. The full matrix lives on the S700M printed mesh trucker caps page.

Panel by Panel: Fabric, Structure and Closure

Please note camouflage patterns may feature brand logos.

Every mesh back in the group is 100% polyester, and every cap runs a pre-curved visor. The real variables are the crown structure, the closure and what the mesh itself is doing: plain, washed, flag or printed.

Graphics on the Front, Graphics in the Mesh

Read the two tables together and the group sorts itself: the LC5M and LC101V speak to the camo buyer, the LC350M and AM350M carry the flag two different ways, and the S700M covers everything from state pride to novelty graphics without changing the silhouette on the wall.

Picking the Right Mesh Cap for the Job

Start with crown structure. Four of the five are structured and mid-profile, holding their shape on a shelf and under an embroidery hoop. The LC101V is the deliberate exception: unstructured and low-profile, it fits the buyer who wants a relaxed, already-worn look, and it behaves differently in decoration for the same reason. Then look at closures. Hook-and-loop on the LC5M and LC101V favors quick fitting at a counter; the snapbacks on the LC350M, AM350M and S700M suit resale programs where one cap must fit many heads.

Channel finishes the sort. Hunting retailers and outdoor outfitters usually lead with the LC5M, add the LC101V for the casual rack, and use the LC350M as the patriotic accent. General resale, festival and team buyers tend to start from the AM350M or S700M, where camo is optional rather than assumed. Buyers who decide they want full fabric camo crowns instead of mesh will find the LC10 and LC15V cover that ground, with the SN200 handling specialty colors, and the LCB08 and LCB12 beanies extending the same licensed patterns into winter.

Season shapes the mix as much as channel does. Mesh caps lead from spring through early fall, when airflow is the feature doing the selling, and hunting accounts typically keep the LC5M and LC101V forward through the fall openers because camo keeps pulling after the heat breaks. The flag styles surge around Memorial Day and July Fourth but hold a steady baseline the rest of the year, while the S700M behaves less like a seasonal cap and more like a rotating graphic program, with state flag and novelty designs traded in and out as local audiences respond.

Decoration Notes for Mesh Back Crowns

Mesh back caps decorate on the front, and this group makes that easy: the 60/40 brushed blends and the cotton twill of the AM350M are steady embroidery surfaces, and the structured crowns hoop without a fight. The unstructured LC101V calls for a lighter touch, with smaller art and backing chosen to suit a soft crown. On the flag and printed styles, plan art that works with the graphic already in the mesh rather than against it, and sew a sample before running the batch. Flat embroidery, patches and heat-applied emblems all sit comfortably on these fronts, and the structured snapback styles hold their shape through repeated handling on a retail rack.

Shops that build their decoration programs around a completely blank canvas often run this Kati group beside the Joes USA J88069 five panel baseball cap, whose plain five panel front takes wide, tall art that a six-panel seam would interrupt. It is the standard answer when a customer brings in a logo too broad for a seamed crown.

Trucker Walls, Blank Programs and Reorders

A mesh wall rarely stops at one brand. Most resale buyers round out the Kati styles with broader ranges like the mesh back hats collection and the full wholesale trucker hats range, and screen printers pulling undecorated canvases work from the blank trucker hats wholesale group. Within that mix, the Joes USA JOE112 original trucker hat is the classic solid six-panel companion to these Kati graphics, and the Joes USA JOE112FP five panel mesh trucker gives the same program a seamless front for larger prints.

For reorders, write the style number with the exact colorway string from the product page, mesh included: LC5M Realtree AP/Tan, S700M Heather Grey/USA Flag, AM350M Navy/USA Mesh. Licensed pattern names change look dramatically between versions, so precision here is what keeps a reordered wall matching the one that sold.

Frequently Asked Questions

Why does the mesh back cap hold such a steady place in wholesale headwear?

Airflow and silhouette. The polyester mesh keeps the cap wearable through hot work and long seasons outdoors, while the structured front panel gives decorators a reliable surface, so the same cap serves both the wearer and the shop putting art on it.

Which of the five styles is unstructured?

Only the LC101V. It pairs a low-profile, unstructured six-panel crown with washed mesh-back panels, giving it a relaxed, broken-in character the structured styles do not have.

What is the difference between the printed mesh on the S700M and the flag mesh on the AM350M?

The S700M prints 19 different design combinations onto its mesh, from state flags to skulls and clovers. The AM350M uses a dedicated USA flag mesh behind solid cotton twill fronts, so it reads as a single purposeful patriotic cap rather than one option in a graphic series.

How do the closures break down across the group?

Two ways: hook-and-loop on the LC5M and LC101V, snapback on the LC350M, AM350M and S700M. Hook-and-loop favors quick individual fitting; snapbacks suit programs where caps pass between many wearers.

Do the front panels take embroidery well?

The 60/40 brushed blends and the cotton twill front of the AM350M are conventional embroidery surfaces, and the structured crowns hoop cleanly. The unstructured LC101V decorates too, but benefits from smaller art and appropriate backing.

Can hunting retail and general resale pull from the same group?

Yes, and that is the point of it. The LC5M and LC101V anchor the camo side while the AM350M and S700M serve flag and graphic buyers, all sharing the mesh back construction so the wall stays visually coherent.

Is there a full fabric version of the flag mesh styles?

Both flag caps have one. The LC350M pairs with the full fabric LC350, and the AM350M pairs with the all-cotton AM350S, so a program can offer mesh and solid versions of the same look.

Where do the Joes USA trucker styles fit alongside this Kati group?

As the blank counterpart. The JOE112 and JOE112FP supply solid, undecorated trucker canvases in the same structured snapback format, which lets a decorator sell Kati graphics and custom-logo caps from one coordinated program.

Explore More Kati

Kati USA Flag Caps | Kati Licensed Camo Caps and Beanies

Browse Collections: Kati Hats Caps and Beanies | Kati Best Sellers