Kati USA Flag Caps Wholesale

Wholesale USA Flag Caps: Kati LC350, LC350M, AM350S and AM350M Compared

A flag cap earns its spot on the wall before any custom work is added, which is why decorators, event merchandisers, farm and ranch counters and uniform buyers keep a patriotic silhouette in rotation all year. The four styles gathered here are the USA flag builds from the Kati headwear range: two that pair licensed camouflage with a woven flag treatment, and two that put the flag against a clean solid crown. All four share a structured, six-panel, mid-profile crown and a pre-curved visor, so a mixed presentation still reads as one coherent program.

That camo and solid split is the practical reason this group exists. A hunting retailer, a rural hardware counter and a municipal crew program can all be covered by one brand without compromise on either side. Buyers weighing these caps against the broader line can also scan the Kati best sellers to see which silhouettes decorators come back to most often.

Four Caps, Two Directions: Camo Flag and Solid Flag

The Kati LC350 Camo Woven USA Flag Cap is the full fabric camo entry. It runs a 60/40 cotton/polyester shell, a woven USA flag panel design and a tri-glide buckle closure, offered in Country DNA/USA Flag and Xtra/USA Flag. The buckle gives the back of the cap a cleaner line than a snap, a detail farm and ranch buyers regularly ask about. Colorway level detail lives on the LC350 camo USA flag caps page.

Its family pair, the Kati LC350M Camo Woven USA Flag Mesh Cap, keeps the same 60/40 cotton/polyester front panels and woven flag design but swaps the rear of the crown for 100% polyester mesh and a snapback closure. It comes in Xtra/Xtra/USA Flag Mesh, a single focused colorway that keeps reordering simple. The LC350M camo flag mesh caps page covers it panel by panel.

On the solid side, the Kati AM350S USA Flag Cap is the 100% cotton option, produced in Black/USA, Navy/USA and Red/USA with a hook-and-loop closure that adjusts quickly at an event table. Where camouflage is the wrong tone for the audience, this is the cap that carries the flag story. Its dedicated AM350S USA flag caps page breaks out each crown color.

The Kati AM350M USA Flag Mesh Cap completes the square: 100% cotton twill front panels, a 100% polyester USA flag mesh back and a snapback closure, in the same Black, Navy and Red crown colors. Because the flag lives in the mesh itself, the entire front of the cap stays open for decoration. The AM350M USA flag mesh caps page lists the full colorway rundown.

One companion belongs in this conversation. The Kati S700M Printed Mesh Trucker Cap offers printed USA flag mesh colorways such as Black/USA Flag, Navy/USA Flag, Red/USA Flag, White/USA Flag and Heather Grey/USA Flag. A print reads differently than a woven treatment, which gives a merchandiser a second look and a second story on the same peg. The S700M printed mesh trucker caps page lists every design combination in the range.

Construction Details at a Glance

Please note camouflage patterns may feature brand logos.

Every style in the table shares the structured, six-panel, mid-profile crown and pre-curved visor, so shelf presentation and embroidery setup stay consistent when the four hang side by side.

Which Cap Carries Which Program

Most buyers arrive with a channel in mind rather than a style number, so the quickest way through the group is to start from the program and work backward.

Camo Flag or Solid Flag: How the Decision Usually Falls

The camo pair sells where camouflage already sells. Hunting shops, outdoor outfitters and rural retailers treat the LC350 and LC350M as a natural extension of the licensed camo wall, with the woven flag adding a reason to pick the cap up. Between the two, the choice comes down to the back of the crown: full fabric with a buckle for a cleaner, quieter cap, or polyester mesh with a snap for hot weather wear.

The solid pair belongs to programs where camouflage would read wrong: municipal crews, veterans events, school booster tables, delivery teams. The AM350S is the all-cotton, hook-and-loop version; the AM350M trades the fabric back for USA flag mesh and a snapback. Since both run identical Black, Navy and Red crowns, a buyer can run them together and let wearers pick their fit.

Buyers who want camo without the flag element have clear neighbors in the line. The Kati LC10 Licensed Camo Cap covers the classic six-panel camo slot with a Flex-Strap closure, the LC15V answers the same brief with hook-and-loop, and the Kati SN200 Specialty Licensed Camo Cap adds specialty crowns such as Realtree Fishing Blue. For cold months, the Kati LCB08 8 Inch Licensed Camo Beanie and the longer LCB12 cuffed beanie keep the same licensed patterns on the shelf after cap season slows.

Closure and Adjustment Comparison

Decoration Planning Around a Flag Design

All four caps present structured front panels, and the 60/40 blends and cotton fronts in this group are familiar territory for embroidery shops. The planning question is not whether the caps decorate, it is how the custom art shares space with the flag. On the LC350 and LC350M, art is usually sized and placed so it does not crowd the woven flag design; a sewn sample before the full run settles placement quickly. On the AM350M the flag sits entirely in the mesh, leaving the twill front as an uninterrupted field, which is why many decorators treat it as the easiest of the four to art up.

When a program needs a plain crown built specifically around large front embroidery, with no flag element competing for attention, the Joes USA J88069 five panel baseball cap is the companion decorators reach for: a mid-profile five panel front that takes wide art, sitting comfortably next to the flag caps in a program lineup.

Wholesale Program Notes and Reorder Habits

Reorders in this group are simplest when written against the style number plus the exact colorway name as it appears on each product page: LC350 Xtra/USA Flag, AM350S Navy/USA, and so on. Camo colorway names follow the licensed pattern names, so keeping the wording exact avoids substitutions a retail buyer would notice on the wall.

Programs built around these four styles often carry a solid, unbranded trucker slot beside them for screen printers and patch programs. The Joes USA JOE112 original trucker hat and the Joes USA JOE112FP five panel mesh trucker fill that slot with blank canvases that match the flag caps in silhouette, letting one embroidery setup serve the whole wall. Buyers who plan seasonally tend to bring the flag caps forward ahead of Memorial Day, July Fourth and fall hunting openers, then hold the solid crowns as the year-round baseline.

Frequently Asked Questions

What separates the LC350 from the LC350M?

The rear of the crown and the closure. Both share 60/40 cotton/polyester front construction, the woven USA flag panel design and a structured mid-profile shape. The LC350 is full fabric with a tri-glide buckle and two camo colorways; the LC350M runs a 100% polyester mesh back with a snapback in Xtra/Xtra/USA Flag Mesh.

Which style suits a program that cannot use camouflage?

The AM350S and AM350M. Both run solid Black, Navy and Red crowns with the flag as the accent, the AM350S in 100% cotton with hook-and-loop and the AM350M with a cotton twill front and USA flag mesh back.

Do the camo colorways use licensed patterns?

Yes. Colorways such as Country DNA and Xtra are licensed camouflage patterns, which is also why camouflage patterns may feature brand logos on the finished cap.

How should embroidery be planned on a flag cap?

Keep the art on the front panels and size it to sit clear of the flag elements, then sew a sample before committing the run. The AM350M is the exception in a good way: its flag is in the mesh, so the front panel is fully open.

Are all four closures adjustable?

Yes. The LC350 uses a tri-glide buckle, the AM350S uses hook-and-loop, and the LC350M and AM350M use snapbacks, so each cap adjusts to the wearer at the point of sale.

Can a flag cap program continue into cold months?

It can, by pairing the caps with the LCB08 and LCB12 licensed camo beanies. The White Realtree AP beanie colorways sit especially well next to flag caps on a winter display.

Is there a printed flag alternative to these woven styles?

The S700M printed mesh trucker cap carries USA flag print colorways along with Texas, Colorado, Canada and Mexico flag designs, giving a graphic-led counterpoint to the woven treatment on the LC350 family.

Why carry both a camo flag and a solid flag cap at once?

Because they reach different buyers with the same message. The camo pair moves through hunting and outdoor channels while the solid pair serves uniform, event and team programs, and the shared crown shape keeps decoration setup identical across both.

Explore More Kati

Kati Mesh Back and Trucker Caps | Kati Licensed Camo Caps and Beanies | Kati Camo Beanies

Browse Collections: Kati Hats Caps and Beanies | Kati Best Sellers